Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 3)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 3
1 Introduction
1.1 General
This manual describes optional functions that expand the standard functionality
of the CATCenter system. In general, these functions apply to all CATCenter
systems. Exceptions are noted separately within the applicable chapters.
All functions described in this manual must be activated using an activation
code. This procedure is described once in
Chapter 1.2 .
The functions to be activated are described in
Chapter 2 and up.
The functions are explained in the following order:
• Chapter 2 : PUSH/GET Function
• Chapter 3 : TS Function
• Chapter 4 : IP Switching
These chapters describe both the setup and the operating steps.
1.2 Activating New Functions
The CATCenter system can be adapted using functions, which are available at
an additional charge. Currently, three moduls are available to you:
• Push/Get function: Function modul for 1 CATCenter
cluster to push your own or to get
other screen contents
• TradeSwitching function: Function modul for 1 CATCenter
cluster to operate several
UCON (screens / targets) with only 1
keyboard and mouse.
• IP switching: Function modul for client-side
integration of the IP operation of a
CATCenter X8 system (a system can
consist of one or more clusters).
This function includes the
TradeSwitching function.