Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 9)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 9
Use the
ESC key to exit the Push/Get rights submenu. If you have made any
changes up to this point but wish to exit the Push/Get rights submenu without
saving your changes, a notification message to that effect will be displayed.
To save the changes you have made, press the
F2 key and return to the EDIT
USER GROUP submenu.
Default setting: No
2.3.3 Differing Rights of the Source and Target Console -PUSH
Within the framework of the "PUSH" function, there can be two different states
for the target console (the console receiving the image). Either the console is
logged on (that is, it is in use by a user) or the console is logged off.
Console logged on:
If the target console is in use by a user then all effective access rights for this
user are assigned to the available targets. The effective access rights can be
viewed in the corresponding column of the Edit Target Access Rights
menu
( see Chapter 5.1.1.5 of the CCX8 Operation Guide – Edit Target Access
Rights ).
If screen contents are now assigned to this user, then all settings from the Edit
Target Access Rights menu are adopted.
• If this user has "Full" access rights to the assigned target then he or
she has complete keyboard and mouse control. All AdonIS rights
assigned to him or her also continue to be available.
• If this user has "View" access rights, then he or she can only look at
the assigned display; keyboard and mouse access are not possible.