Transparent mode installation, Preparing to configure transparent mode, Using the setup wizard – D-Link DFL-500 User Manual

Page 19: Changing to transparent mode

Advertising
background image

DFL-500 User Manual

19

Transparent mode installation

This chapter describes how to install your DFL-500 NPG in Transparent mode. If you want to install the DFL-
500 NPG in NAT/Route mode, see

NAT/Route mode installation

.

This chapter includes:

•

Preparing to configure Transparent mode

•

Using the setup wizard

•

Using the command line interface

•

Setting the date and time

•

Connecting to your network

Preparing to configure Transparent mode

Use

Transparent mode settings

to gather the information you need to customize Transparent mode settings.

Transparent mode settings

Administrator Password:

IP:

_____._____._____._____

Netmask:

_____._____._____._____

Default Gateway:

_____._____._____._____

Management
IP:

The management IP address and netmask must be valid for the network from which you will
manage the DFL-500 NPG. Add a default gateway if the DFL-500 NPG must connect to a router
to reach the management computer.

Primary DNS Server:

_____._____._____._____

DNS Settings:

Secondary DNS
Server:

_____._____._____._____

Using the setup wizard

From the web-based manager you can use the setup wizard to create the initial configuration of your DFL-500
NPG. To connect to the web-based manager, see

Connecting to the web-based manager

.

Changing to Transparent mode

The first time that you connect to the DFL-500 NPG it is configured to run in NAT/Route mode. To switch to
Transparent mode using the web-based manager:

• Go to System > Status .
• Select Change to Transparent Mode.
• Select Transparent in the Operation Mode list.
• Select OK.

The DFL-500 NPG changes to Transparent mode.

To reconnect to the web-based manager, change the IP address of your management computer to 10.10.10.2.
Connect to the DFL-500 NPG internal interface and browse to https:// followed by the transparent mode
management IP address. The default transparent mode Management IP address is 10.10.10.1.

Advertising