D-Link DFL-500 - Manual (Page 86)

DFL-500 User Manual
86
The DFL-500 NPG changes operation mode.
• To reconnect to the web-based manager, browse to the interface that you have configured for
management access using https:// followed by the IP address of the interface.
Restarting the DFL-500 NPG
Use the following procedure to restart the DFL-500 NPG:
• Go to System > Status .
• Select Restart.
The DFL-500 NPG restarts.
Shutting down the DFL-500 NPG
Use the following procedure to shut down the DFL-500 NPG:
• Go to System > Status .
• Select Shutdown.
The DFL-500 NPG shuts down and all traffic flow stops.
The DFL-500 NPG can only be restarted after shutdown by disconnecting and reconnecting the
power.
System status monitor
You can use the system status monitor to view system activity, including the number of active communication
sessions and information about each session.
The system status monitor also displays DFL-500 NPG CPU usage, memory usage, and system up-time
statistics.
To view system status:
• Go to System > Status > Monitor .
The system status monitor appears.
• To page through the list of connections, select Page Up
and Page Down .
• Select Refresh
to update the information displayed.
• You can select Clear to stop any active communication session.