D-Link DFL-500 - Manual (Page 45)

DFL-500 User Manual
45
Deleting the user name deletes the authentication configured for the user.
Configuring RADIUS support
If you have configured RADIUS support and a user is required to authenticate using a RADIUS server, the
DFL-500 NPG contacts the RADIUS server for authentication.
When using a RADIUS server for user authentication, PPTP and L2TP encryption is not supported and you
should not select Require data encryption when configuring Windows clients for PPTP or L2TP.
This section describes:
•
Adding RADIUS servers
•
Deleting RADIUS servers
Adding RADIUS servers
To configure the DFL-500 NPG for RADIUS authentication:
• Go to User > RADIUS .
• Select New to add a new RADIUS server.
• Enter the name of the RADIUS server.
You can enter any name. The name can contain numbers (0-9), uppercase and lowercase letters (A-
Z, a-z), and the special characters - and _. Other special characters and spaces are not allowed.
• Enter the domain name or IP address of the RADIUS server.
• Enter the RADIUS server secret.
• Select OK.
Example RADIUS configuration
Deleting RADIUS servers
You cannot delete RADIUS servers that have been added to user groups.
• Go to User > RADIUS .
• Select Delete beside the RADIUS server name that you want to delete.
• Select OK.