Administration, System status – D-Link DFL-500 User Manual

Page 81

Advertising
background image

DFL-500 User Manual

81

Administration

This chapter describes how to use the web-based manager to administer and maintain the DFL-500 NPG. It
contains the following sections:

•

System status

•

Upgrading the DFL-500 NPG firmware

•

Displaying the DFL-500 NPG serial number

•

Backing up system settings

•

Restoring system settings

•

Restoring system settings to factory defaults

•

Changing to Transparent mode

•

Changing to NAT/Route mode

•

Restarting the DFL-500 NPG

•

Shutting down the DFL-500 NPG

•

System status monitor

•

Network configuration

•

Configuring the internal interface

•

Configuring the external interface

•

Configuring the management interface (Transparent mode)

•

Setting DNS server addresses

•

Configuring routing

•

Adding routing gateways

•

Adding a default route

•

Adding routes to the routing table

•

Configuring the routing table

•

Enabling RIP server support

•

Adding routes (Transparent mode)

•

Providing DHCP services to your internal network

•

System configuration

•

Setting system date and time

•

Changing web-based manager options

•

Adding and editing administrator accounts

•

Configuring SNMP

System status

If you log into the web-based manager using the admin administrator account, you can go to System > Status
to make any of the following changes to the system settings.

•

Upgrading the DFL-500 NPG firmware

•

Backing up system settings

•

Restoring system settings

•

Restoring system settings to factory defaults

•

Changing to Transparent mode

•

Changing to NAT/Route mode

•

Restarting the DFL-500 NPG

Advertising