D-Link DFL-500 - Manual (Page 87)

DFL-500 User Manual
87
System status monitor
At the top of the display, the system status monitor shows:
CPU usage The current CPU usage statistics of the DFL-500 NPG.
Memory usage The percentage of available memory being used by the DFL-500 NPG.
Up time The number of days, hours, and minutes since the DFL-500 NPG was last started.
Total Number of Sessions The total number of active communication sessions to and through the DFL-500 NPG.
Each line of the system status monitor displays the following information about each active firewall connection:
Protocol The service type or protocol of the connection.
From IP The source IP address of the connection.
From Port The source port of the connection.
To IP The destination IP address of the connection.
To Port The destination port of the connection.
Expire The time, in seconds, before the connection expires.
Clear Stop and active communication session.
Network configuration
Go to System > Network to make any of the following changes to the DFL-500 NPG network settings:
•
Configuring the internal interface
•
Configuring the external interface
•
Configuring the management interface (Transparent mode)
•
Setting DNS server addresses