Hypertherm PHC Sensor - Manual (Page 19)

Section 2: Installation and Setup 19
Section 2: Installation and Setup
The standard PHC system includes the following components:
Standard components
PHC Control Module
Power cord - 6.5 ft. (2 m)
Lifter assembly with torch breakaway
Plasma interface assembly
Interface cables
• Lifter motor drive cable
• Lifter interface cable
• Plasma
interface cable
• Ohmic contact wire
• CNC interface cable
Sensor™ PHC system instruction manual
In addition, the following optional components can be ordered:
Optional components
Interface cables
Torch mounting clamps -1 3/8 ”, 1 3/4” and 2” diameters available.
Claims
Claims for damage during shipment
If your unit is damaged during shipment, you must file a claim with the carrier. Hypertherm will furnish you with
a copy of the bill of lading upon request. If you need additional assistance, please contact your Hypertherm
Customer Service agent.
Claims for defective or missing merchandise
If any of the merchandise is defective or missing, call your authorized Hypertherm distributor. If you need
additional assistance, please contact your Hypertherm Customer Service agent.