Ordering information – Hypertherm HD3070 w/ Automatic Gas User Manual
Page 8
1-5
HD3070 w/Automatic Gas Console
ORDERING INFORMATION
The figure below represents an HD3070 plasma system with automatic gas console mounted in a
robotic environment. A complete robotic system is also represented in block diagram form on page
1-7. See pages 1-20 and 1-21 for representations of an HD3070 plasma system with automatic gas
console mounted on an X-Y cutting table.
Notes: •
Block diagrams are offered to clarify connection points and do not necessarily
reflect relative sizes or distances between components.
•
If the cutting system has a power track for cabling and hosing, be certain to see the
Specifications section to check hose, cable and connector diameters.
Figure 1-2 HD3070 System in Robotic Environment
2
3
4
5
6
1
19
21
1
HD3070 Power Supply, Auto
2
HD3070 Automatic Gas Console
3
Remote High Frequency (RHF) Console
4
Leads Between Power Supply and RHF Console
5
Work Cable Between Power Supply and Work Table
6
Leads Between Power Supply and Auto Gas Console
7
PAC186 Torch (not shown)
8
Quick Disconnect Assembly - Straight (not shown)
9
10 Inch Torch Mounting Sleeve (not shown)
10
PAC184 Torch
11
Quick Disconnect Assembly - 45
°
12
8 Inch Torch Mounting Sleeve
13a Shielded Leads Between RHF Console and Torch (with Blow
Down Check Valve & Hose)
13b Shielded Leads Between RHF Console and Torch (without Blow
Down Check Valve & Hose)
14a Off-Valve Assembly (with Blow Down Solenoid Valve)
14b Off-Valve Assembly (without Blow Down Solenoid Valve)
15
48 Inch Shield Gas Hose Between Off-Valve Assy and Torch
16
48 Inch Plasma Gas Hose Between Off-Valve Assy and Torch
17
Leads Between Gas Console and Off-Valve Assy
18
Cable Between Gas Console and Cutting Machine Interface
19
Control Cable Between Power Supply and Cutting Machine Interface
20
Current Setpoint Cable Between Power Supply and Cutting Machine
Interface or Between Power Supply and RCC
21
Timer-Counter Cable Between Power Supply and Cutting Machine
Interface or Between Power Supply and Timer-Counter
22
Remote Current Control (RCC)
23
Timer-Counter
11
10
12
14
22
23
17
13
15 16
18
20
1-00