Installation manual masterline ultimate hybrid – HUBER+SUHNER MASTERLINE Ultimate Hybrid User Manual

Page 2

background image

HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of

tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product

warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these pro-

ducts. For advice concerning the general handling of these products please contact HUBER+SUHNER.

Step 4

Rig a rope to allow cable assembly to be hoisted up. Fit carabiner

through pulling eye.

• Pull Assembly up to the mast


Only use pulling eye on MLUH connector head or hoisting grip if


Step 5

Hook-in MLUH head at mounting bracket and secure with retained


Step 6

Fix cable to the mast using suitable clamps.

Recommended spacing between clamps is 1m.

Clamps should be applied to hybrid cable starting from a point 1m

below the housing proceeding down to the bottom of the mast.

Step 7

Earth assembly to the mast using an earth link.

Recommendation is 16mm


/ 6 AWG with M8 lugs.

NOTE: the earthing cable can also come in black.

Step 8

The remote radios are connected with fiber optic jumpers, which are

terminated with Q-ODC plug connectors and RRH compatible

interfaces. The power jumpers are terminated with a rugged circular

plastic plug connector and are blunt cut on the RRH side.

MASTERLINE Ultimate Hybrid