HUBER+SUHNER MASTERLINE Ultimate Hybrid - Manual (Page 7)

HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of
tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product
warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these pro-
ducts. For advice concerning the general handling of these products please contact HUBER+SUHNER.
Step 15 Tighten cable gland to secure cable and ensure IP protection.
Step 16 Measure (twice) the required DC tail length and cut them.
Step 17 DO NOT CUT AT ANY STAGE THE FIBRE OPTIC ELEMENT.
Step 18 Route DC cable element to their respective termination points and
connect.
Route earth wire to earth bonding point and connect.
Step 19 If earthing is required outside cabinet/cabin use universal ground-
ing kit and follow separate instructions.
NOTE: the earthing cable can also come in black.
INSTALLATION MANUAL
MASTERLINE Ultimate Hybrid