HUBER+SUHNER MASTERLINE Ultimate Hybrid - Manual (Page 4)

HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of
tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product
warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these pro-
ducts. For advice concerning the general handling of these products please contact HUBER+SUHNER.
BASE STATION END OF ASSEMBLY
Step 1
After unwinding the whole assembly from the reel, while handling
the assembly make sure to leave the pulling tube as long as
possible on the assembly.
Step 2 To remove protective tube hold tube adn loosen gland nut.
Do NOT twist the tube at any stage of removal.
Pull tube off to reveal the tails within.
Step 3 Remove gland nut from cable and keep it safe.
Step 4 Feed tails through cabinet/cabin.
INSTALLATION MANUAL
MASTERLINE Ultimate Hybrid