ikan KVM-7050W - Manual (Page 26)

Shenzhen Konvision Technology Co,.Ltd www.konvision.com
26
the second window blend directly
to the main screen.
Swap
(this item shows in
PIP/PBP mode)
<Right> to swap two
windows
In PIP and PBP, turn right the
VOLUME knob to swap the
signal pictures between two
windows (main window and
second window).
UMD Display ON
OFF
Turn on/off the UMD display
UMD ID 000-127 UMD ID can be set any value
from 000-127. It can be used for
multidevice cascading, set
different UMD ID for different
devices. In remote control
situation, this function can be
used for distinguishing different
devices so as to remote control
different devices.
UMD Main Window
Char
xxxxxxxx It can be set at any character
in ”xxxxxxxx”. Setup process:
Select the UMD Main Window
item, press VOLUME knob, it
shows “xxxxxxxx ok”,
meanwhile, the first character
becomes red, user can select the
character you need by turning the
VOLUME knob (Left/Right),
press the VOLUME knob after
finishing first character, it will turn