Ivoclar Vivadent P300 User Manual
Page 21
21
5.5.2 Information
Settings
Selection of factory
settings
Reset firing hours
Reset vacuum pump
hours
Display
Short description
With this setting, all
values and para-
meters can be reset
to the factory
settings.
Attention:
All individual pro-
grams which have
been created and
saved will be deleted
with this function.
Only after entry of
the user code.
The firing hour count
can be reset to 0.
Only after entry of
the user code.
The operating hour
count of the vacuum
pump can be reset to
0. Only after entry of
the user code.
Settings
Serial number
Software version
Furnace head
firing hours
Operating hours
furnace
Operating hours
vacuum pump
Latest start of
calibration program
Calibration value
Supply voltage
Error table
Display
Short description
Serial number of the
furnace
Shows the current
supply voltage
Important information
The user code (6725) is required for some settings.