Ivoclar Vivadent SR Ivocap Elastomer - Manual (Page 7)

Invest model in the SR Ivocap flask, always
preparing two injection channels. Before investing a
positioner, shorten both models at the base.
3
Mount plaster working model in the articulator
with the help of working bites.
Fully model mouthguard on the model (wax
min 2 mm thick).
1
2
English
Important processing instructions
• Always prepare two joined injection channels
for polymerization
• Possible dough residue dried on the inner wall of the
capsule does not affect the quality of the
polymerized work
• Let set for 10 minutes after injection
• Polymerize in boiling water and under 6 bar pressure
for 45 minutes
• Two capsules of mixed SR Ivocap Elastomer are
required to fabricate a positioner
Modelling of a mouthguard
7