Ivoclar Vivadent SR Ivocap Elastomer - Manual (Page 9)

Finish with 12-16 bladed resin burs. Then, finish
with emery paper (rough and fine).
Correct final details with rubber polishers. Prepolish
with wet pumice and a soft brush, using a bench
motor.
Polish with a clean, dry cloth wheel, using a bench
motor.
7 9
8
English
Important
• The monomer contains methyl methacrylate
• MMA is highly inflammable –
flash point 10 ºC / 50 ºF
• The monomer may irritate eyes, skin and respiratory
organs
• Sensitization by skin contact is possible
• Store the monomer bottle in a cool, dark, well-
ventilated place
• Keep the material away from sources of heat –
do not smoke
• Do not dispose of the monomer in the drainage
system
• Avoid electrostatic charging
Storage
• Do not use the material after the date of expiration.
• Storage temperature: 2–28 ºC / 36–82 ºF
• Store mixed material at 8 ºC / 46 ºF in a cool, dark
place for max 5 days
• If the material is refrigerated, remove the required
quantity of stored material one hour prior to using it
to enable it to reach room temperature
• Store polymerized SR Ivocap Elastomer splints or
positioners in places protected from light
• Keep out of the reach of children
9