Ivoclar Vivadent SR Adoro - Manual (Page 42)

42
Application of the Opaquer
1 st opaquer layer (wash)
Extrude the desired amount of the ready-to-use opaquer paste from the syringe and spread it out slightly on the mixing
pad using a brush. Apply the first opaquer layer (wash) thinly using a brush. Make sure to thoroughly smooth out any
roughness and the retention beads (micro- and macroretention beads) on the metal surface, since the wash layer
represents the most important bond between the metal and the composite. Subsequently, precure the wash for
20 seconds per segment using the Quick.
Version A:
Full-coverage veneer (ideal space)
Version B:
Partial veneer (limited space)
Apply the first opaquer layer (wash) thinly using a brush ...
... and level / fill retentions and any roughness.
1 st opaquer layer Apparatus Time Program
Precuring time per
segmen t
Quick 20 s –