Ivoclar Vivadent SR Ivocap Equipment System - Manual (Page 6)

6
2. Safety First
This chapter is especially important for
personnel who work with the
SR Ivocap System or who have to carry out
maintenance or repair work. This chapter
must be read and the corresponding
instructions followed. 2.1 Indications
The SR Ivocap System must only be used for
injecting the SR Ivocap material and it should
be used for this purpose only. Other uses
than the ones stipulated, i.e. injecting other
materials, etc. are contraindicated. The
manufacturer does not assume any liability
for damage resulting from misuse. The user
is solely responsible for any risk resulting
from failure to observe these Instructions.
Further instructions to assure
proper use of the system:
– The instructions,
regulations, and notes in
these Operating
Instructions must be
observed.
– The system must be
operated under the
indicated environmental
and operating conditions
(Chapter 9).
– The SR Ivocap System
must be properly
maintained (Chapter 7).
2.1.1
Risk of crushing
Do not reach between
pressing plunger and safety
loop with your fingers. There
is a risk of crushing when air
is compressed.
Use protective thermo-gloves
to touch hot metal parts.
Do not use the water bath
without the plastic floaters.
Splash water presents a burn
hazard.
Wear protective clothing to
protect yourself from splash
water.
2.1.2
Burn hazard
2.1.3
Burn hazard
2.1.4
Burn hazard