Ivoclar Vivadent SR Ivocap Equipment System - Manual (Page 8)

8
4. Installation
4.1 Unpacking and checking the
contents
Remove system components from their
packaging and place them on a suitable
table.
Check the delivery for completeness
(see delivery form in Chapter 9) and
transportation damage. If certain parts are
damaged or missing, contact your local
Ivoclar Vivadent Customer Service. We
recommend keeping the original packaging
for future transportation purposes.
4.2 Selecting the location
The diagram below depicts one possible
installation.
Important information
For safety reasons, the installation
of the pressure, power, and water
connections may only be carried out by
qualified technicians (electricians, plumbers).
Furthermore, the national installation
requirements of the corresponding
country must be observed.
Quick-fitting pipe union
Air pressure 6 bar
Flexible pressure tubing
6 bar pressure
Wall bracket for pressure
apparatus
Timer
Water outlet
Water level
Polymerization
bath
Cap-Vibrator
Hot water
supply Cold water
Hydraulic press,
3 t or 80 bar