English – Ivoclar Vivadent SR Vivo TAC User Manual
Page 5
Advertising
English
– Mix the Polymer and Monomer Modifier in a 1.3 : 1
ratio and leave to rest uncovered for 2–3 minutes.
– Polymerization is conducted in a pressure device or in
a heat/pressure polymerization unit (eg Ivomat),
15 minutes at 40–50 °C / 104–122 °F and 2–6 bar
pressure.
If necessary, radiographic balls or similar aids may be
integrated into the diagnostic stents where they are
needed.
Mix the Monomer and Polymer Modifier
Secure the key
Pour the liquid material into the key
After polymerization
5
VivoTAC/OrthoTAC-VA-WE1.qxd 25.11.2005 7:42 Uhr Seite 5
Advertising
This manual is related to the following products: