Ivoclar Vivadent SR Vivo TAC - Manual (Page 6)

Finishing
Conventional finishing and polishing instruments are
used for finishing (according to the conventional PMMA
working techniques).
If requested by the dentist, a radiopaque alveolar ridge
with mucosa can be created by coating this area with
the Monomer/Polymer Modifier.
Fabrication of base plates
In order to reinforce or stabilize the diagnostic stents, a
base plate is fabricated for the palatal or lingual region.
It is made of clear or pink denture base material (eg
ProBase Cold pink/clear) or a heat-curing polymer (eg
ProBase Hot pink/clear).
When fixed restorations are planned (eg with an
interdental gap), the base plate rests on the mesial or
distal remaining dentition to stabilize and position the
restoration.
After finishing
Space retainer for radiopaque Modifier material
Polymerized stents
Stent design for gaps
ProBase Cold clear (also available in pink)
6
VivoTAC/OrthoTAC-VA-WE1.qxd 25.11.2005 7:42 Uhr Seite 6