Ivoclar Vivadent Telio CS - Manual (Page 28)

Lab-fabricated Telio Lab restorations may of course also be relined with Telio CS C&B material. The
procedure is the same as for Telio CAD.
28
For the relining, apply the mixed Telio CS C&B to the inner aspect of the crowns. Keep the mixing tip
immersed in the material to prevent bubbles. If required, the material may also be syringed around the
prepared teeth to avoid bubble formation along the preparation margin.
The curing time is approx. 3 min at room temperature (23 °C / 73 °F). After that, Telio CS C&B is in a hard-
elastic, partially cured state and can be removed from the oral cavity together with the Telio CAD restora-
tion. After complete curing (4-5 min), finishing is carried out extraorally. Cross-cut tungsten carbide burs
are suitable for finishing; for polishing, use silicon carbide rubber polishers (e.g. Astropol, OptraPol).
Application of Telio CS C&B Seated Telio CAD bridge with excess Telio CS C&B material
If necessary, apply Telio CS Desensitizer prior to cementation. Then cement the relined temporary
restoration with Telio CS Link (see page 34).
Completed and cemented Telio CAD restoration
Extraoral removal of excess material… ... with burs and polishers. Completed Telio CAD restoration