Ivoclar Vivadent IPS e.max CAD Chairside - Manual (Page 43)

43
Clean preparation, rinse with water … … and blow dry with oil-free air.
Depending on the cementation material used, subsequently apply the bonding system
Apply SpeedCEM directly into the etched and silanated restoration Set the restoration and remove of excess
Completed IPS e.max CAD restoration in situ, occlusal and buccal view
Seating and Follow-Up Care
Example: Cementation with SpeedCEM
Cementation of IPS e.max CAD restorations with SpeedCEM ®
For the cementation of IPS e.max CAD restorations with SpeedCEM, please proceed as follows:
– Clean the preparation, rinse with water and highly dry with oil-free air
– Apply SpeedCEM directly into the etched and silanated restoration
– Place the restoration and remove excess cementation material
– Polish the cementation margin.