Ivoclar Vivadent Virtual 380 v.3 - Manual (Page 2)

Description
Virtual impression materials are addition-reaction silicones (vinylpolysiloxanes) used to create fine
detail impressions of dentition. Virtual impression materials are available in a variety of viscosities
allowing dental professionals to choose the material and technique best suited for each individual
case.
Colors
See table “Technical Data“
Working times and setting times
Technical Data
Instructions for Use
Material Speed Total Work Time Mouth Set Time*
[min:sec] [min:sec]
Monophase
[tray/wash]
Fast Set 2:15 3:30
Heavy Body Regular Set 2:05 4:30
[tray] Fast Set 1:15 2:30
English
– Set times may deviate from the indicated values by (+/–) 15 seconds.
* Minimum time the impression material should remain in the mouth before removal.
Monophase Heavy Body
Color Blue Blue
Classification Type 2 Type 1
ISO 4823 / ADA Spec. No. 19 Medium-bodied consistency Heavy-bodied consistency
Mixing Ratio
5:1 5:1
[Base : Catalyst]
Linear Dimensional Change [24h]
< 0.20 % < 0.20 %
Strain in Compression [min. – max.] 3 – 5 % 3 – 5 %
Recovery from Deformation > 99.5 % > 99.5 %
Compatibility with Gypsum Pass Pass
Detail Reproduction Pass Pass