Kemppi Protig 410 - Manual (Page 5)

EN
1. PREFACE
1.1 GENERAL
Congratulations on choosing the ProTig equipment. Used correctly, Kemppi products can
significantly increase the productivity of your welding, and provide years of economical
service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specifications of the equipment can be found at the end
of the manual.
Please read the manual carefully before using the equipment for the first time. For your
own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the ’NOTE!’ notation. Read these sections carefully and follow
their instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2 PRODUCT INTRODUCTION
Protig 410 is a TIG ignition unit for demanding professional use. The unit is controlled by
means of a microprocessor and ignition spark is generated by means of thyristors.
These operation instructions are for Protig 410 ignition unit, assembly and installation of TIG
equipment as well as panel functions. In addition instructions describe assembly of Mig/TIG/
MMA equipment, cables and main operations of installation.
3
Pr
oT
ig 410 H
yundai / © Kemppi O
y / 1135