Vertex Standard eVerge EVX-531 User Manual

Page 25

Advertising
background image

EVX-530 S

EriES

O

pErating

M

anual

23

a

dVancEd

o

pEratIon

Press the SIDE-1/SIDE-2 buttons (or [A]/[B]

keys) to select the desired squelch level. Available
selections are “SQLLV OP (Open)”, “SQLLV
TH
(Threshold)”, “SQLLV NM (Normal)” and
SQLLV TI (Tight)”.

Press the [D] key to store the new setting. The

display indicates “- SET -” briefly, then reverts to
the normal channel indication.

You may cancel the new setting by pressing the

[C] key. In this case, the display indicates “-

CANCEL -” briefly.

B

EEp

oFF

Press, (or press and hold), the assigned PF key to

disable the radio beeps temporarily. Press again, (or
press and hold again), the assigned PF key to enable

the radio beeps.
In the EVX-534/-539, when the Beep Off function is

“on” and “off”, the display indicates briefly “BEEP

OFF” and “BEEP ON”.
Note: if the Channel Announcement feature is acti-
vated on the EVX-534/-539, the Channel Announce-

ment also disables and enables when the Beep Off
function is “on” and “off”.

aF m

InImum

V

olumE

(EVx-534 & EVx-539)

Press, (or press and hold), the assigned PF key, the

display indicates “AFATT ON” briefly, and reduce
the audio output to the (lower) level programmed.
Again press, (or press and hold), the assigned PF key,

the display indicates “AFATT OF” briefly, and re-
sume normal audio output level. You may change the
programmed (lower) level by the “User Set (Menu)”
mode. See page 33 for more information.

ch a

nnouncEmEnt

Press, (or press and hold), the assigned PF key to se-

lect the channel change confirmation between “beep”
(In the EVX-534/-539, indicates “BEEP” briefly)

and “announcement” (In the EVX-534/-539, indi-

cates “ANNOUNCE” briefly).

W

hIspEr

Press, (or press and hold), the assigned PF key to

increase the microphone gain; thus you can speak in
a low voice (whisper) temporarily. Press again, (or
press and hold again), the assigned PF key to resume

normal microphone gain.
In the EVX-534/-539, when the Whisper function is

“on” and “off”, the display indicates “WHISP ON

Advertising
This manual is related to the following products: