Vertex Standard eVerge EVX-531 - Manual (Page 40)

EVX-530 S
EriES
O
pErating
M
anual
38
a
dVancEd
o
pEratIon
at the upper right corner of the display. You may
find the “ALL DEL” menu which is located at
the last message loop. Describes this menu later.
 Press the SIDE-1 button at once (or press the
SIDE-2 button twice) to confirm the “Call ID” of
the selected message, if desired.
 Press the [A]/[B] keys to select other received
message, or press the [C] key to return to the top
of the “IN BOX” function.
Delete (Individual message)

Press the [A]/[B] keys to select the received mes-
sage you wish to delete.
 Press the SIDE-2 button at once (or press the
SIDE-1 button twice) to select the “DELETE”
menu, then press the [D] key. The display indi-
cates “DEL Y/N”(“Y” is blinking).
 Press the [D] key again to delete the selected
message. You may cancel the deleting the mes-
sage by pressing the [C] key.
 Press the [A]/[B] keys to select other received
message you wish to delete, or press the [C] key
to return to the top of the “IN BOX” function.
Delete (All messages)

Press the [A]/[B] keys to select the “ALL DEL”
menu which is located at the last message loop,
then press the [D] key. The display indicates “DEL
Y/N”(“Y” is blinking).
 Press the [D] key again to delete the all messages.
You may cancel the deleting the all messages by
pressing the [C] key.
WRITE: If your transceiver is EVX-539, you may
create a sending message and send/save it in this
function. The EVX-539 can memorize up to 24 mes-
sages include pre-programmed message which deter-
mined by the CE142 Programming Software.
Create the message

Create the message using the [0] - [9] key (for se-
lect the character) and [A]/[B] key (for select the
digit). The EVX-539 can create up to 32 charac-
ters.
You may delete the current character by press-
ing the [Ý] key, or insert the space character by
pressing the [#] key.
 Press the [D] key, then press the [A]/[B] keys (or
SIDE-1/SIDE-2 buttons) to select the “SEND”