K-Patents PR-03 - Manual (Page 14)

14 14
14 14
8 PR-03 instruction manual
2.2.3 Check list for mounting in a tank, a vessel or a large pipe (PR-03-P)
A Probe sensor PR-03-P can be inserted with a sanitary clamp into tanks and vessels which either don’t
have a scraper or where the mixer doesn’t touch the vessel wall. A Probe sensor can also be flush mounted
in a cooker where the scraper touches the wall.
1. Both the inserted and the flush mounted Probe sensor are mounted on the vessel wall with the cable
socket downwards.
2. The inserted probe sensor is mounted close to a stirrer to ensure representative sample of the process
liquid and to keep the prism clean.
3. The sensor should be conveniently accessible for service.