Kreg PRS3040 Precision Router Table Insert Plate Levelers User Manual

Insert plate levelers, Precision assembly instructions

background image

These instructions were intended for use with the Kreg Precision Router
Table Insert Plate. Depending on your setup and choice of Insert Plate,
you may need to make adjustments as necessary. If you are not using
a Kreg Precision Router Table Insert Plate, please reference your Insert
Plate’s instructions as necessary.

These levelers are designed to help you mount an insert plate into your
shop-built router table top. Unlike the majority of levelers on the market,
this product works by attaching directly to the bottom of your router table
top, eliminating the need for a supporting rabbet. A hole cut straight
through the table-top, sized exactly to the dimension of your router table
insert plate is all that is needed to use these levelers.


Insert Plate Levelers



Item# PRS3040

Before you start... • 800.447.8638

Tools Required:
• 1/8” Allen Wrench (Included)
• #2 Square Drive (Included)

WARNING: This product contains
one or more chemicals known to the
State of California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.

5/2010 RT10168

Rev B