0 time keeping mode and its sub-displays, 1 time keeping mode, 2 time keeping mode – La Crosse Technology K2-100 User Manual

Page 3: 3 time keeping mode

Advertising

4.0 Time Keeping Mode and its Sub-displays

Current Time Display

adjust
button

start/stop

button

start/stop

button

Dual Time Display

Chronograph Display

Countdown Timer Display

Repeater Timer Display

Current Time and Dual Time Display

Press the [start/stop] button once to switch between
the Current Time Display and the Dual Time Display.

Current Time Display

The 1st row of the display shows the Pressure History Graph
of the last 48 hours;

- T h e 2 n d r o w o f t h e d i s p l a y s h o w s t h e c u r r e n t

time in hour, minute and second;

- The 3rd row of the display shows the month, day and day of

week.

Press and hold the [lap/reset] button for 2 seconds to select
between 'second' display or 'temperature' display.

Dual Time Display

The 1st row of the display shows the Dual Time Display
Indicator.

- The 2nd row of the display shows the dual time in hour,

minute and second;

- The 3rd row of the display shows the month, day and day of

week for the dual time.

NOTE:

- To use the Pressure History Graph, check the 'Implication of

the Pressure History Graph ' section for more detail.

4.1 Time Keeping Mode

- Current Time and Dual Time Display

start/stop

button

mode

button

start/stop

button

hold

adjust

Dual Time Display

Current Time Setting Display

Dual Time Display

pressure history graph

dual time
display Indicator

digits have been
selected (flashing)

Current Time Display

day of week

month

date

current time

dual time

4.2 Time Keeping Mode

- Setting the Current Time and the Dual Time

second

12/24

hour format

display
contrast

minute

hour

day

year

month

To Set the Time and Date

To set the date and time, press and hold the [adjust]
button for 2 seconds to change from the Current Time
Display to Current Time Setting Display.

The second digits flash on the display because they are
being selected.

The Setting Procedure

Press [adjust] button to change the selection as in the
Current Time Setting Sequence.

While digits are flashing (select ed), press the [start/stop]
button to increase the number; press the [lap/reset] button
to decrease the number. Hold the button to change
the number at a higher speed.

While display contrast setting is being selected, press the
[start/stop] button to increase the number. Press the
[lap/reset] button to decrease the number. 15 gives a
darker display; 0 gives a lighter display.

After you set the time, date, display format and display
contrast, press the [mode] button to exit the Current Time
Setting Sequence.

- If no button is pressed in the setting display for about 3

minutes the K2-100 will return to the Current Time
Mode automatically

To Set the Dual Time

To set the date and time, press and hold the [adjust]
button for 2 seconds to change from the Dual Time
Display to Dual Time Setting Display.

- Follow the Current Time Setting steps to set the

subsequent settings of the dual time.

Current Time Setting Sequence

adjust

hold

adjust

mode

button

adjust

Daily / Date Alarm Displays

Current / Dual Time Display

Switch between the Current / Dual Time Display

Switch between the Daily / Date Alarm Display

4.3 Time Keeping Mode

- Daily Alarm, Date Alarm and Chime/Alarm On/Off

start/stop

Daily Alarm and Date Alarm Display

- K2-100 has two alarm modes: The Daily Alarm and

the Date Alarm.

- T h e D a i l y A l a r m a n d t h e D a t e A l a r m w o r k

independently.

- When the Daily Alarm is ON, the K2-100 sounds at the

preset alarm time every day.

- When the Date Alarm is ON, the K2-100 sounds at the

preset alarm time on the schedule date.

P r e s s t h e [ s t a r t / s t o p ] b u t t o n t o s w i t c h b e t w e e n
the Daily Alarm Display and the Date Alarm Display.

To Set the Daily Alarm and Chime On or Off

Press the [lap/reset] button to change the ON/OFF status
of alarm and the hourly chime, in the Daily Alarm Display.

- When the alarm indicator appears (alarm

ON), the K2-100 sounds at the preset alarm time
every day.

- When the chime indicator appears (chime ON),

the K2-100 beeps every hour on the hour.

To stop the sound, press any button to stop the alarm.

To Set the Date Alarm On or Off

Press the [lap/reset] button to change the ON/OFF status
of the alarm, in the Date Alarm Display.

- When the alarm indicator appears (alarm ON),

the K2-100 sounds at the preset alarm time on the
preset date.

Date Alarm Display

Daily Alarm Display

daily alarm
indicator

date alarm
indicator

current time

alarm time

the alarm
date

Daily Alarm Display

Date Alarm Display

hPa

Increase
the number

Decrease
the number

Increase the minute
at a higher speed

Decrease the number
at a higher speed

start/stop

hold start/stop

lap/reset

hold lap/reset

Advertising

Popular Brands

Popular manuals