La Crosse Technology WS-9119U - Manual (Page 7)

7
Year
Date Month
3. Press again the SET key to switch to the minutes. The minute digits start flashing.
4. Use the MAX/+ or MIN/- key to set the minutes.
5. Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try to receive the signal between 2:00 and 6:00 am every day despite it being manually set, if the
WWVB reception function has been set ON. When it does receive the signal, it will change the manually set time into
the received time. During reception attempts the WWVB tower icon will flash. If reception has been unsuccessful, then
the WWVB tower icon will not appear but reception will still be attempted the following hour.
CALENDAR SETTING:
The date default of the intelligent weather station is 1. 1. in the year 2004. Once the radio-controlled time signals are
received, the date is automatically updated. However, if the signals are not received, the date can also be set manually.
1.
The year starts flashing.
2. Use the MAX/+ or MIN/- key to set the year. The range runs from 2004 to 2030.
3. Press the SET key again to confirm and to enter the month setting. The month starts flashing.
4. Use the MAX/+ or MIN/- key to set the month.
5. Press the SET key again to confirm and to enter the date setting mode. The date starts flashing.
6. Use the MAX/+ or MIN/- key to set the date.
7. Confirm all calendar settings with the SET key and enter the WWVB Time Reception ON/OFF setting.
WWVB TIME RECEPTION ON/OFF SETTING
In area where reception of the WWVB time is not possible, the WWVB time reception function can be turned OFF. The
clock will then work as a normal Quartz clock. (Default setting is ON).
1.
The digit “ON” will start flashing on the LCD.
2. Use the MAX/+ or MIN/- key to turn OFF the time reception function.
3. Confirm with the SET key and enter the ºF/ºC Temperature Unit setting.
Note:
If the WWVB time reception function is turned OFF manually, the clock will not perform any reception of the
WWVB time as long as the WWVB OFF function is activated.
The WWVB reception icon will not be displayed on the LCD.
°F/°C TEMPERATURE UNIT SETTING
The temperature display can be selected to show temperature data in °F or °C. (default °F)
1.
Use the MAX/+ or MIN/- key to toggle between “°F” or “°C”.
2. Confirm with the SET key and enter the Air Pressure Unit setting.
Flashing
Flashing
Note:
Date, Month, Year (for 24h display)
Month, Date, Year (for 12h display)