Lumens Technology PC192 - Manual (Page 37)

English - 36
Chapter 8 Connecting to Microscope
1 Mount the microscope adapter accessories onto the microscope
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø28 mm, Ø31 mm, Ø33
mm, and Ø34 mm.
2 Connect the lens of PC192 with the microscope adapter
3 Select the Microscope mode
3.1. When using the control panel or remote control
3.1.1. Press [MENU] to activate the setting menu.
3.1.2. Press [
c], [d], [f], or [e] to select [Image Mode].
3.1.3. Press [
f] or [e] to the [Microscope].
3.1.4. Press [MENU] to exit.
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the [FOCUS] button on either side of the PC192 lens to
execute the auto focus.
5 Digital zoom
5.1. Press [MENU] to activate the setting menu.
5.2. Press [
c], [d], [f], or [e] to select [Setting].
5.3. Press [
f] or [e] to the [Control].
5.4. Press [
d] to select [Digital Zoom].
5.5. Press [
f] or [e] to the [On].
5.6. Press [MENU] to exit.
For eyepieces of Ø33 mm or Ø34
mm, only fit one microscope
adapter (with the greatest
diameter). For eyepieces of Ø28 mm or Ø31 mm,
fit one microscope adapter with the
greatest diameter along with another
appropriate one.