Marantz IS201 - Manual (Page 23)

15
ENGLISH
TROUBLESHOOTING
7
There’s no sound
Check your IS201 dock connector.
• Make sure the iPod is inserted properly in the dock connector.
• Make sure your iPod is playing.
• Make sure the cable plugs are pushed in all the way.
• Make sure the AC adapter is connected to a suitable wall outlet and connected to
IS201 dock connector.
Check the receiver or amp connected to IS201 dock connector.
• Make sure the power is turned on.
• Make sure the input is selected on the jack connected to your iPod.
• Make sure the volume control is not set too low.
7
The remote controller doesn’t control the iPod
Check your IS201 dock connector
• Make sure the iPod is inserted properly in the dock connector.
• Make sure there is nothing to block the infrared radiation between IS201 dock
connector and remote controller.
• Make sure you’ve selected the right mode for the remote mode switch on the rear of
IS201 dock connector.
• Make sure the remote control cable is connected properly.
7
There’s no control display on TV screen
Make sure the display mode (OSD/LCD) is set properly, or the selected mode is
suitable for the TV type. (
☞
p. 14)
SPECIFICATIONS
Power Supply ...........................................................................DC IN12V (AC ADAPTER)
Net weight (DOCK PART, CONNECTOR PART, including mains cord) ....................350g
Dimensions ........................................................................DOCK PART: 95
× 49 × 84mm
..........................................................CONNECTOR PART: 102
× 34 × 54mm
Terminals ......................S-video output
× 1, Analog Audio output × 1, Remote output × 1,
RS232C terminal
× 1, FLASHER IN terminal × 1
¶ AC Adapter (Supplied)
Power Supply ............................................................AC100V – 240V (50Hz / 60Hz) 0.4A
Specifications subject to change without prior notice.
IS201E_01_Eng 06.4.27 4:49 PM ページ15