Marantz IS201 - Manual (Page 24)

16
ENGLISH
OTHERS
The section describes the care and
maintenance tasks that must be performed
to optimize the operation of your Marantz
equipment.
7
Cleaning of equipment external
surfaces
The exterior finish of your unit will last
indefinitely with proper care and cleaning,
Never use scouring pads, steel wool,
scourging powders or harsh chemical
agents (e.g., lye solution), alcohol, thinner,
benzine, insecticide or other volatile
substances as these wil mar the finish of
the equipment. Likewise, never use cloths
containing chemical substances. If the
equipment get dirty, wipe the external
surfaces with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water,
in a ratio of one part detergent to six
parts water.
• dip a soft, lint-free cloth in the solution
and wring the cloth till it is damp.
• wipe the equipment with the damp
cloth.
• dry the equipment by wiping it with a dry
cloth.
7
Repairs
Only the most competent and qualified
service technicians should be allowed to
service the factory-trained warranty station
personnel have the knowledge and special
facilities needed for repair and calibration of
this precision equipment. After the warranty
period has expired, repairs will be
performed for a charge if the equipment
can be returned to normal operation.
In the event of difficulty, refer to your dealer
or write directly to the nearest location to
you that is listed on the Marantz Authorized
Service Station list. If writing, please
include the model and serial number of the
equipment together with a full description of
what you think is abnormal about the
equipment's behaviour.
IS201E_01_Eng 06.4.27 4:49 PM ページ16