Marantz SA11S3N - Manual (Page 31)

24
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
ENGLISH
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
Menu settings
USB Resume (Playing tracks from where
they were previously stopped)
1
Use ui to select “USB Resume”
and press ENTER .
2
Use ui to select resume
playback on / off and press
ENTER .
GSelectable modesH
Off :Resume playback is not set.
On :Resume playback is set.
3
Press MENU .
Saves the settings.
NOTE
• Resume Play only works when an identical USB memory
device is inserted. If another USB memory device is inserted,
the unit will start playing from the first file.
• The unit may not play your desired file if files have been
added to or deleted from the identical USB memory device.
Digital Out (Setting for the digital output)
1
Use ui to select “Digital Out”
and press ENTER .
2
Use ui to select on / off and
press ENTER .
[Selectable modes]
On :Enable the digital output.
Off :Disable the digital output.
3
Press MENU .
Saves the settings.
Phase (analog output phase switching)
Switches the output signal phase for balanced outputs. The
unit’s balanced output conforms to USA system. This setting
must be set to “Inverted” in order to execute balanced outputs
to a European system amplifier with a different (inverted)
phase.
1
Use ui to select “Phase” and
press ENTER .
2
Use ui to select the phase
corresponds to the amplifier and
press ENTER .
[Selectable modes]
Normal : USA system.
Inverted : European system.
3
Press MENU .
Saves the settings.
Auto Stnby (Auto standby mode)
A standby status is established at the unit if a stopped status
or a “no external input signal” status continues for 30 minutes
or more.
1
Use ui to select “Auto Stnby”
and press ENTER .
2
Use ui to select on / off and
press ENTER .
[Selectable modes]
On : Enable Auto Standby mode.
Off : Disable Auto Standby mode.
3 Press MENU .
Saves the settings.
NOTE
When the Input Source of this unit is set to “PC”, the Auto
Standby function may not work properly depending on the
applications of your PC.
1.SA-11S3N_ENG_Final_0525.indd 24 2012/05/25 17:14:08