Marantz SA-17S1N - Manual (Page 22)

ENGLISH
20
To Check Programmed Tracks
Press SCROLL/RECALL button on the remote while
programming or program play (when “PROG” indicator is
blinking or lighting up). Programmed tracks will be displayed
in programmed order.
To Delete a Programmed Track
q Press SCROLL/RECALL button in stop mode when
program has been made (when “PROG” indicator lights
up or blinks). Programmed tracks will be displayed in
programmed order.
w When the track you want to delete appears on the display,
press CANCEL button on the remote at once. The deleted
track’s track number indicator will disappear.
To Clear Whole Program
Press 7 STOP button two times while in program play. In stop
mode, press 7 STOP or CANCEL button once.
Program can also be cleared by pressing 0 OPEN/CLOSE
key to open the disc tray.
To Add Tracks to Program
Press PROGRAM button when program is remaining (“PROG”
indicator is constantly lights up) and in stop mode. “PROG”
indicator will blink and tracks can be added to the end of
program.
* Please be careful about the following matters.
• When programming 1st to 9th tracks in a disc that has
over 10 tracks by using numeric buttons,. For instance,
programming the 3rd track after programming the 1st track,
press 3 button more than approximately 1.5 seconds after
1 button is pressed.
• Likewise, when programming a track at 10th or after. For
example, to program 13th track, press 3 button within
approximately 1.5 seconds after 1 button is pressed.
• When programming a track in a disc that has less than 9
tracks. For instance, to program the 5th track after 4th track
has been programmed, press 5 button more than
approximately 0.5 second after 4 button is pressed.
• When programming with 4 and ¢ buttons, press the
buttons repeatedly until the track you want appears. And
the gap has to be less than 0.5 second.
Searching your favorite tracks
(AMS (Automatic Music Scan) Play)
If AMS button on the remote is pressed in stop mode or in
playback mode, PLAY “
3” indicator will blink and the
beginnings of all the tracks will be played for 10 seconds
each starting from the first track. This feature is convenient to
search where your favorite track is.
When you have found the favorite track, press AMS button
again. PLAY indicator will light up constantly and normal
playback will begin from the current track.
* If AMS button is pressed after tracks have been
programmed, only the selected tracks will be played with
AMS.
Q&A
• How many tracks can be programmed?
Up to 30 tracks can be programmed for program
play.
• Can I listen to program play repeatedly?
Press REPEAT button once. “RPT” indicator will light
and program play will be repeated.
• Can I shuffle the programmed track order?
Press RANDOM button during program play or in
stop mode.
Blinks
1 2
TRK
3 4 5 6 7 8 9 10 11 12 13 14 15
OPERATION