Marantz VP-12S4 - Manual (Page 17)

11
ENGLISH
You can position the projected image by changing the
height of the projector’s adjusters.
1. Move the adjuster lever to the left or right to
enable adjuster changing. Carefully lift the
projector.
2. Once having positioned the projector, return the
adjuster lever as before to lock in place. Check
the adjusters are securely locked before
releasing your hands from the projector.
3. Turn the adjuster to fine-adjust the height.
❖
Returning the Projector to its Initial Position
Slightly lift the projector, turn the adjuster lever to the left or right, then carefully set the projector down.
When the projecting image is a trapezoid, correct it in Keystone and in the Display Menu.
See “Display”. (
☞
P.22)
❖
Keystone
(Electronic keystone correction)
Keystone Correction
Adjusting the Height
You can adjust the image position with the Lens Shift knob.
❖
Turn the Lens Shift knob to clockwise : The image goes up.
❖
Turn the Lens Shift knob to counterclockwise : The image goes down.
Adjusting the Image Position
Up
Down
Clockwise
Counterclockwise