Using the controls – 2 speed combo models, Select water level, Select cycle and water temperature – Maytag PAVT915AWW User Manual
Page 4: Step 1 step 2, Regular cycle, Permanent press fabrics cycle, Delicates cycle
Cycles, options, lights
What can & cannot be
Controls at a glance
Dryer Exhaust tips
Care & Cleaning
Service & Warranty
Storing the washer
Using the Controls – 2 Speed Combo Models
WATER LEVEL SETTING
1/4 – 1/2
1/2 – 3/4
3/4 – Full
Items must circulate freely for best results.
In wash water temperatures below 60
detergents do not dissolve well or clean well. Care
labels define cold water as up to 85
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to Reset and then
back to the desired setting.
Select Cycle and Water
To select a cycle and water temperature, push the
control dial in (off position) and turn it to the right
(clockwise) until the pointer is at the number of
minutes and water temperature needed for the wash
load in the Regular, Permanent Press or Delicates
cycles. All rinses are cold water.
Used to wash Cottons and heavily soiled items.
Permanent Press Fabrics Cycle
Used to minimize wrinkles with a cool-down spray
rinse following the wash.
Used for items requireing delicate wash action. The
washer will fill, them agitate and soak alternately.