Definitions and abbreviations, Manual usage, Warning, caution and notes – MEGA Corp. MTT-OPS-1 User Manual
Page 4: Use of shall, will, should and may, Section 1 definitions and abbreviations -1
1-1
MTT-OPS-1
13 Nov 2013
SECTION 1
Definitions and Abbreviations
Contents
MANUAL USAGE
This technical manual only contains information
required to safely operate the MTT. See the
appropriate Maintenance and Operators Safety
Manual for specific vehicle system information and
maintenance procedures. The exact location of the
hazards and description of the hazards are reviewed
in this section. All personnel working on or operating
the MTT must become familiarized with all the safety
messages.
If your system is not covered in this manual please
contact MEGA Corp. Product Support Group at:
US toll free: 1-800-345-8889
Direct: 1-505-345-2661 or visit our website at
for more detailed contact
information.
See the proper manufacture specific Operation &
Maintenance, Safety Manuals and Service Manuals
for detailed chassis system information and chassis
specific maintenance procedures.
Due to the nature of these processes, ensure that all
safety information, warnings and instructions are
read and understood before any operation or any
maintenance procedures are performed. Some
procedures take place with heavy components and
at moderate heights, ensure proper safety
procedures are maintained when performing these
actions. Failure to use and maintain proper safety
equipment and procedures will cause injury, death or
damage to equipment.
WARNING, CAUTION AND NOTES
The following definitions are found throughout the
manual and apply as follows:
Operating procedures and techniques, which could
result in personal injury and/or loss of life if not
carefully followed.
Operating procedures and techniques, which could
result in damage to equipment if not carefully
followed.
Operating procedures and techniques that are
considered essential to emphasize.
USE OF SHALL, WILL, SHOULD AND MAY
Shall and Will – Used when application of a
procedure is mandatory.
Should – Used when application of a procedure is
recommended.
May - Used to indicate an acceptable or suggested
means of accomplishment.
Warning, Cautions & Notes ........................................1-1
Shall, Will, Should and May ........................................1-1
Safety Messages ............................................................1-2
Abbreviations ................................................................. 1-5
MTT Overview ................................................................ 1-6