MEGA Corp. MTT-OPS-1 - Manual (Page 70)

MTT-OPS-1
13 Nov 2013
SECTION 7
Appendix
7-19
MTT-OPS(CL)-1
13 Nov 2013
AFTER OPERATIONS
These procedures are used to perform a walk-around
inspection after using the MEGA water tanker
systems. This inspection is in addition to and does
not replace the vehicle manufacturer’s inspection
requirements.
1. Vehicle parking brake – ON
2. Cab Control Switches – SET OFF
3. Chocks – As Required.
4. Water Cannon – CHECKED AND SECURED
5. Vehicle Hydraulic Tank – CHECKED
6. Tank Lines and Hoses – SECURED
7. Tank Drain Petcocks – As Required.
8. Spray Heads – SECURED AND SET
9. Water Pump Assembly – CHECKED
a. Water Pump – Check for damage and volute
case drain valve set as required.
10. Hose Reel – CHECKED
N-18