Measurement Computing CB-7080 - Manual (Page 39)

CB-7080 & CB-7080D Counter/Timer User's Guide $AA4S
2-21
$AA4S
Description: Set the filter status. Refer to " Digital filter setting " for more information.
Syntax: $AA4S[chk](cr)
$ A delimiter character
AA 2-character HEX module address, from 00 to FF
S=0 digital filter is disabled
S=1 digital filter is enabled
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Response :
Valid response !AA[chk](cr)
Invalid response ?AA[chk](cr)
no response Syntax error, communication error or address error
! A delimiter character indicating a valid response
? A delimiter character indicating an invalid response
AA 2-character HEX module address
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Examples :
Disable the digital filter:
command: $0140(cr)
response !01(cr)
Enable the digital filter:
command $0241(cr)
response !02(cr)