Measurement Computing CB-7080 - Manual (Page 50)

CB-7080 & CB-7080D Counter/Timer User's Guide $AABS
2-32
$AABS
Description : Set input mode. Refer to " Counter/Frequency input mode selection ".
Syntax : $AABS[chk](cr)
$ A delimiter character
AA 2-character HEX module address, from 00 to FF
B
S=0 channel 0 is non-isolated, channel 1 is non-isolated.
S=1 channel 0 is isolated, channel 1 is isolated.
S=2 channel 0 is non-isolated, channel 1 is isolated.
S=3 channel 0 is isolated, channel 1 is non-isolated.
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Response :
Valid response !AA[chk](cr)
Invalid response ?AA[chk](cr)
no response Syntax error, communication error or address error
! A delimiter character indicating a valid response
? A delimiter character indicating an invalid response
AA 2-character HEX module address
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Examples :
Counter/frequency channel 0 is non-isolated, channel 1 is non-isolated:
command: $01B0(cr)
response: !01(cr)
Counter/frequency channel 0 is isolated, channel 1 is isolated:
command: $02B1(cr)
response: !02(cr)
Counter/frequency channel 0 is non-isolated, channel 1 is isolated:
command: $03B2(cr)
response: !03(cr)