Measurement Computing DaqBoard 3000USB Series - Manual (Page 11)

DaqBoard/3000USB Series Installation Guide 968492 IG-5
DaqBoard/3000USB Series – Board Dimensions
In general, all standoffs should be used to mount the board to a metal frame.
Note 1: The standoff at this location connects to the USB chassis for shunting electrostatic discharge.
Note 2: The standoff at this location connects to the DaqBoard/3000USB board’s internal chassis plane for shunting
electrostatic discharge.
WARNING !
Avoid redundant connections. Ensure there is no signal conflict between SCSI pins
and the associated header pin (J5. J6. J7. and J8). Also ensure there is no conflict
between TB7 (thermocouple connections) and the SCSI and/or the 40-pin headers.
Failure to do so could possibly cause equipment damage and/or personal injury.