Dbk215 16-connector bnc connection module option, Dbk215 – Measurement Computing DaqBoard 3000USB Series User Manual
Page 55
DaqBoard/3000USB Series User’s Manual
927593
Connections & Pinouts 2-11
DBK215
16-Connector BNC Connection Module Option
DBK215
If you are not using a TB-100 terminal board connection option with your DaqBoard/3000USB Series
board you can, instead, make use of a DBK215 module. The DBK215 includes:
o
BNC Access to 16 inputs or outputs (on front panel)
o
on-board screw-terminal blocks*
o
on-board socket locations for custom RC Filter networks*
o
68-pin SCSI connector (on rear panel)
* The top cover plate must be removed to access the terminal blocks and
the RC filter network section of the DBK215’s board.
The 68-pin SCSI connector (P5) connects to the DaqBoard/3000USB Series board’s 68-pin SCSI
connector via a CA-G55, CA-G56, or CA-G56-6 cable.
The DBK215 provides BNC and screw-terminal access to all analog and digital I/O from the host data
acquisition device. Related to the screw-terminals is a front panel slot for routing all I/O wiring.
Reference Notes:
For details regarding the DBK215, refer to Appendix A.