Metro 9 Series Controlled Humidity Heated Holding & Proofing Cabinets - Manual (Page 4)

2
IDENTIFYING YOUR CABINET
For future reference, note the serial and model number,
found on the data plate of the cabinet, here.
Serial number
Model number
Date the cabinet was
put into service
Fill out and return the warranty card located at
the back of this manual.
PART NUMBERING
C5 9 9 X - S FS - L P FS A
CABINET NAME
CABINET TYPE
9 = 9 SERIES
(CONTROLLED HUMIDITY)
CABINET SIZE (HEIGHT)
9 = FULL
7 =
3 /
4
5 = 1 /
2
3 = UNDER COUNTER
MATERIAL
S = STAINLESS
N = ALUMINUM
A = ACCESSORIES
(IF APPLICABLE)
ELECTRICAL CABINET RATING
BLANK = 120V 2000W
L = 120V 1440W
X = 220-240V, 50/60HZ, 1681-2000W
REAR DOOR(S)
(PASS THRU)
BLANK = NON-PASS THRU
FS = FULL SOLID
DS = DUTCH SOLID
FC = FULL CLEAR
DC = DUTCH CLEAR
CABINET CONSTRUCTION
BLANK = NON-PASS THRU
P = PASS-THRU, DOORS
(FRONT & REAR)
SLIDES
L = LIP LOAD (FIXED)
U = UNIVERSAL (ADJUSTABLE)
FRONT DOOR(S)
FS = FULL SOLID
DS = DUTCH SOLID
FC = FULL CLEAR
DC = DUTCH CLEAR
L01-419 Rev. F L&M.indd 2 1/16/12 2:36 PM