Metz MECABLITZ 45 CL-4 digital BASIC_KIT - Manual (Page 61)

ķ
61
• Mecabounce 45-90 (Order No. 000045908)
With this diffuser, soft lighting can be achieved in a very simple manner. It
gives your pictures a marvellous soft appearance, while the tone of skin is
rendered faithfully. The maximum working range is diminished by the fac-
tor 2 in conformity with the loss of light.
• Power-Pack P76 (Order No. 000129768)
For a high number of flashes and short recycling times (abt 400 full-power
flashes). To connect the P 76, the V76 connecting cable (Order No.
0000376) is additionally required.
• Connecting cable V76 (Order No.000003762)
to connect the P76.
• Bounce diffuser 60-33 (Order No. 000060334)
To soften heavy shadows with reflected light.
• Camera bracket 70-35 (Order No. 000070353)
For firm fastening of medium- and large-format cameras.
• Standard foot 301 (Order No. 000093014)
In conjunction with SCA 300, for connection to the accessory shoe of
cameras with hot shoe contact.
• Slave-Adapter SCA 3083 digital (Order No. 000330838)
To operate the 45 CL-4 digital as a slave flash unit in the cordless Metz
Remote System, for optical simultaneous triggering and optical triggering
with preflash suppression for digital cameras. The SCA 3045 connecting
cable is additionally required (Order No. 0030450).
• Synch leads:
Coiled synch lead 45-49 (Order No: 000045499)
Coiled synch lead 45-54 for hot shoe (Order No: 000045542)
Synch lead 45-48, 1 m (Order No: 000045480)
Synch extension lead 60-54 (5 m) (Order No: 000060541)
• Bracket adapter 60-28 (Order No. 0006028)
For parallax correction of reflector and camera with close-ups and wide-
angle shots.
• Carrying strap 50-31 (Order No. 000050315)
• Connecting cable SCA 300 A (Order No. 000093057)
Connects the flash unit to adapters of the SCA 300 system.
Disposal of batteries
Do not dispose of spent batteries with domestic rubbish.
Please return spent batteries to collecting points should they exist in your
country. Please return only fully discharged batteries. Normally, batteries are
fully discharged if:
• The device they powered switches itself off and indicates „Spent batteries“.
• They no longer function properly after prolonged use.
To ensure short-circuit safety please cover the battery poles with adhesive
tape.
Errors excepted. Subject to changes !
708 47 0026-A1 BASIC-KIT 14.10.2008 12:54 Uhr Seite 61