Montigo H34VO - Manual (Page 12)

H-Series VO Outdoor Gas Fireplace
Page 12 XG0150 - 070714
Installation
Figure 9f. Front Left Log, (Log F).
Installing the Log set:
The H38VO are supplied with a six ceramic fibre log logset. Unpack the
logs and handle them very carefully.
Step 1. Remove the glass door as described in the previous Instructions.
Air Inlets
Pilot Assembly
Fireplace Base
Rear / Bottom Log
Notch in Log
Log A
Air Inlets
Fireplace Base
Log D
Figure 9c. Top Left Log, (Log D).
Air Inlets
Fireplace Base
Log E
Step 5. Place Front Left log (Log D) as shown in figure 9c.
Figure 9e. Top Right Log, (Log E)..
Step 6. Place Front Right log (Log E) as shown in figure 9e.
Fireplace Base
Log F
Air Inlets
Fireplace Base
Log C Log B
Step 7. Place Front Left log (Log F) as shown in figure 9f. Set notch in
lower end of Log F against stile on Log Grate.
Figure 9g. Completed Logset.
Figure 9a. Bottom Rear Log, (Log A).
Step 2. Place the bottom Rear log (Log A) as shown in figure 9a.
Figure 9b. Left front Log, (Log C) and Right front Log, (Log B).
Step 3. Place the bottom Right log (Log B) and bottom Left Log, (Log
C) as shown in figure 9b.
If logs are not placed properly, excessive sooting will result.
NOTICE