5 specifications, 1 electrical sdti, 2 optical sdti – Nevion AES-VMUX User Manual
Page 11: 3 aes, 4 5.5 power, Specifications, Electrical, Optical, Latencies, 5 specifications
Specifications
11
AES-VMUX/-SFP User Manual Rev. G
5 Specifications
5.1 Electrical SDTI
Video standard
576/25i ITU-R BT.656
Error detection
EDH according to SMPTE RP165
Input cable length
Greater than 250m
All other SDI parameters conform to ITU-R BT.656
5.2 Optical SDTI
Optical range depends on the output power of the transmitter and the sensitivity of the receiver
of the next module.
See Nevion SFP datasheet available from support or the Nevion web site.
5.3 AES
Inputs and outputs according to
AES3-2003
Physical interface
110 ohm transformer balanced
Minimum sampling frequency
16.5 kHz
Maximum sampling frequency
54.7 kHz
Double sample rates using AES
Single channel double sampling frequency mode is supported. i.e. 96kHz Mono
signal using both sub-frames of the AES signal.
AES Outputs switch off completely if there is no signal in the routed timeslot.
5.4 Latencies