8 10 general environmental requirements, On-site, 8 on-site re-programming – Nevion AES-VMUX User Manual
Page 33
Advertising
FLP4 commands
33
AES-VMUX/-SFP User Manual Rev. G
exceeded.
The VS (Video Standard) alarm is triggered if the input video signal is not a Nevion SDTI audio
signal
9.8 On-site re-programming.
The module may be re-programmed on site with a GYDA Multicon system controller. Firmware
and instructions will be provided by Nevion support when necessary.
Advertising
This manual is related to the following products: