Nevion DWC-HD-DMUX - Manual (Page 21)

DWC-HD-DMUX Rev. F
nevion.com | 21
Note that if a stereo pair of embedded audio is missing, the user will still be
allowed to select that pair from the audio matrix. The output will however go to
the fallback position immediately. A missing stereo pair will be shown in the
block-diagram as a red cross over the appropriate matrix input line.
The text on the information page gives information about functionality not displayed on the
dynamic block diagram.
The video delay represents the actual delay between input and output video.
The audio de-embedders 1-4 show the state of the audio control package for their
associated audio group de-embedded from the input stream.
The audio embedders 1-4 show the state of the audio control package and the audio bit
depth for their associated audio group embedded in the output stream.
Embedded UART shows the data rate of the data link embedded in the audio control
packages on the incoming signal.
4.3.2 Configuration page
The different configuration possibilities are explained in Chapter 3, under the corresponding
blocks or functions.